|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Rotary Tooling |
Home >
Rotary Tooling > HYDRAULIC CHUCK
|
 |
|
|
|
|
DUAL CONTACT HYDRAULIC CHUCK (For MOULD) CBT
|
|
|
|
|
|
|
|
 DUAL CONTACT HYDRAULIC CHUCK (For MOULD) CBT |
| TAPER No. |
MODEL No. |
d1 |
D1 |
D2 |
L |
L1 |
L2 |
G |
EDP NO. |
| 40 | CBT40-HMC1/4-4.72 | 0.250 | 0.787 | 1.752 | 4.720 | 2.756 | 1.063 | M5x0.8mm | WE020HMC |
| CBT40-HMC1/4-5.90 | 0.250 | 0.787 | 1.752 | 5.900 | 3.937 | 1.063 | M5x0.8mm | WE022HMC |
| CBT40-HMC5/16-4.72 | 0.313 | 0.866 | 1.752 | 4.720 | 2.756 | 1.063 | M6x1.0mm | WE024HMC |
| CBT40-HMC5/16-5.90 | 0.313 | 0.866 | 1.752 | 5.900 | 3.937 | 1.063 | M6x1.0mm | WE026HMC |
| CBT40-HMC3/8-4.72 | 0.375 | 0.945 | 1.752 | 4.720 | 2.756 | 1.260 | M8x1.0mm | WE028HMC |
| CBT40-HMC3/8-5.90 | 0.375 | 0.945 | 1.752 | 5.900 | 3.937 | 1.260 | M8x1.0mm | WE030HMC |
| CBT40-HMC1/2-4.72 | 0.500 | 0.984 | 1.752 | 4.720 | 2.756 | 1.457 | M10x1.0mm | WE032HMC |
| CBT40-HMC1/2-5.90 | 0.500 | 0.984 | 1.752 | 5.900 | 3.937 | 1.457 | M10x1.0mm | WE034HMC |
| CBT40-HMC5/8-4.72 | 0.625 | 1.260 | 1.752 | 4.720 | 2.756 | 1.654 | M12x1.0mm | WE036HMC |
| CBT40-HMC5/8-5.90 | 0.625 | 1.260 | 1.752 | 5.900 | 3.937 | 1.654 | M12x1.0mm | WE038HMC |
| CBT40-HMC3/4-4.72 | 0.750 | 1.339 | 1.732 | 4.720 | - | 1.654 | M16x1.0mm | WE040HMC |
| CBT40-HMC3/4-5.90 | 0.750 | 1.339 | 1.850 | 5.900 | - | 1.654 | M16x1.0mm | WE042HMC |
| | | | | | | | | |
| | | | | | | | Unit : mm | |
| TAPER NO. | MODEL No. | d1 | D1 | D2 | L | L1 | L2 | G | EDP NO. |
| 40 | CBT40-HMC6-120 | 6 | 20 | 44.5 | 120 | 70 | 27 | M5x0.8mm | WE100HMC |
| CBT40-HMC6-150 | 6 | 20 | 44.5 | 150 | 100 | 27 | M5x0.8mm | WE102HMC |
| CBT40-HMC8-120 | 8 | 22 | 44.5 | 120 | 70 | 27 | M6x1.0mm | WE104HMC |
| CBT40-HMC8-150 | 8 | 22 | 44.5 | 150 | 100 | 27 | M6x1.0mm | WE106HMC |
| CBT40-HMC10-120 | 10 | 24 | 44.5 | 120 | 70 | 32 | M8x1.0mm | WE108HMC |
| CBT40-HMC10-150 | 10 | 24 | 44.5 | 150 | 100 | 32 | M8x1.0mm | WE110HMC |
| CBT40-HMC12-120 | 12 | 25 | 44.5 | 120 | 70 | 37 | M10x1.0mm | WE112HMC |
| CBT40-HMC12-150 | 12 | 25 | 44.5 | 150 | 100 | 37 | M10x1.0mm | WE114HMC |
| CBT40-HMC16-120 | 16 | 32 | 44.5 | 120 | 70 | 42 | M12x1.0mm | WE116HMC |
| CBT40-HMC16-150 | 16 | 32 | 44.5 | 150 | 100 | 42 | M12x1.0mm | WE118HMC |
| CBT40-HMC20-120 | 20 | 34 | 44 | 120 | - | 42 | M16x1.0mm | WE120HMC |
| CBT40-HMC20-150 | 20 | 34 | 47 | 150 | - | 42 | M16x1.0mm | WE122HMC |
|
|
 |
|
